Motorcycle Refueling Pipe Motorcycle Tools Hydraulic Brake Release Tool Check Oil Pumping Pipe

Motorcycle Refueling Pipe Motorcycle Tools Hydraulic Brake Release Tool Check Oil Pumping Pipe The brake system bleed  is designed to simplify and speed up the process of changing brake fluid in the hydraulic system. The check  allows you to effectively bleed  from the system and prevent the fluid from flowing back. The brake bleed  is ideal for repairing the working cylinders of brake and clutch actuators, as well as replacing the working fluid in the hydraulic circuit. The brake fluid replacement  ensures reliable exhaust of the system and stable  of the vehicle's brake system. 1. Put the short tube on the and fix it with a clamp; 2. Fix the short tube to the joint and put the long tube into the container to the fluid; 3. Check whether the shut-off  is in the correct position - the long fixed tube is the  end 4. Slightly unscrew the joint until you see the fluid moving in the tube; 5. Start to press the pedal or the brake lever to discharge the brake fluid; 6. Add brake fluid until the in the tube disappears; 7. When the system is bled, don't forget to tighten the nut Important Start bleeding from the wheel farthest from the master brake cylinder. Next we move along the -shaped pattern. For left-hand drive cars, the procedure should start with the right rear wheel. Then the left rear. In the front we also started from the right and then  to the left. Material: Stretch fabric

Label: Yes