Aoling Truck Tail Lights 24V Red Brake Small White Reverse Yellow Sequential Turn Signal Style Waterproof Trailer Tail Rear Lights Tractor Trailer

―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― 🛫【Certified Store on JOOM】 A Japanese seller delivering high-quality products across borders! 📦【Shipped from Japan】 We pack carefully and deliver promptly and securely. 🔍【Strict Inspection Based on Japanese Quality Standards】 Only carefully selected products of excellent quality are delivered. 📒【Japanese Instruction Manual May Be Included】 We recommend using a text recognition app for translation. 👍【If you are satisfied with the product, please "Follow" our store and leave a review!】 Your support means a lot to us 💖 ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― ★【Brake lamp】When you connect the red wire + black wire, the wire part of the tail lamp will provide auxiliary lighting, and 5 red LEDs will light up above the wire and 5 below it. It can be used as a red high beam when stopping. ★【Small】If you connect the green wire + black wire, the wire part of the rear light will remain as auxiliary lighting, and the 10 LEDs above and below will not light up. This type of low beam lighting is useful as a position lamp while driving. ★【Blinker】When you connect the yellow wire + black wire, the 12 LEDs in the middle of the tail light will be sequential. When you connect the purple wire + black wire, the yellow light will be constantly lit. It can be used as a turn signal when turning. ★【Reverse】When you connect the white wire + black wire, 12 white LEDs will light up on each side of the tail lamp. Then, when the car reverses, the white LED will light up. This type attracts the attention of oncoming vehicles and pedestrians better than the normal type. ★[For 24V vehicles] Truck tail lamps come with 4 sets of M4 mounting screws and nuts per light, so you can insert the head of the screw into the mounting hole, move it, and secure it with the nut. There is also a rubber ring to prevent the screw from being lost unexpectedly. In addition, there are a total of 6 mounting holes on the tail lamp body, one each on the top and bottom, and one each on the left and right, but you can choose to install them according to the design of your car. It can be installed on various 24V vehicles such as trucks, dump trucks, trailers, light trucks, camper shells, tractors, and trailer boats. Product details Material: Plastic + LED + Metal Operating voltage: DC24V Lens color: Red + Clear + Yellow Light color: Red (high/low) + yellow (sequential & constant) + white Functions: Brake + Small + Turn Signal + Reverse Wiring method: 6-wire connection Mounting screw diameter: M4 Body size: 29.6*9.2*3.5CM (approx.) Wiring length: 23CM (approx.) Product Features ★[Installation Instructions] Each truck tail lamp comes with 4 sets of M4 mounting screws and nuts. Insert the head of the screw into the mounting hole, move it, and secure it with the nut. There is also a rubber ring to prevent the screw from being lost unexpectedly. In addition, there are a total of 6 mounting holes on the tail lamp body, one each on the top and bottom, and one each on the left and right, so you can choose which one to install depending on the design of your car. ★[For 24V vehicles] Can be installed on various 24V vehicles such as trucks, dump trucks, trailers, light trucks, tractors, and trailer boats. Note 1. Not compatible with 12V vehicles. There is a risk of the light not turning on. Thank you for your understanding. 2.We recommend that you assemble it temporarily and check that the light works before installation. 3. To further improve waterproofing, additional treatment is recommended.