Specification：
Application: Remote control of lamps and lanterns
Shell material: ABS
Operating current: 220V 10A Relay
Rated frequency: 433MHz
Transmit power: ≤10dBm
Receiver sensitivity: -108dbm
Coding mode: learning code
Control distance: 50m
Wiring: 1 in-1 out
Product certification: CE
Battery: CR2016 button battery
Controller:
Product Model: AK220U-1B
Product Name: Single-channel controller
Working Voltage: AC 85-250V
Control circuit: one way can be controlled
Remote control frequency: 433MHZ
Load Power：10A
Working Mode: Ignition, self-locking, interlocking
Product Size:
Board: 54*31*11MM
Case：62*40*25MM
Learning methods and steps:
Tap Mode:
Press the receiver learning button 1 time, and the LED on the receiver will blink 1 time. When the LED is on, press the remote control button (to make it learn), the LED on the receiver will blink 3 times and then turn off, learning is successful.
Self-locking mode:
Press the receiver to learn button 2 times, and the LED on the receiver will blink 2 times. When the LED is on, press the remote control's button (to let it learn), the LED on the receiver will blink 3 times and then turn off, learning is successful.
Interlock Mode:
Press the receiver learn button 3 times, the receiver LED will blink 3 times. When the LED is on, press the remote control button (to make it learn), and press remote control button A, the LED flashes 3 times. Press the remote control button B, the LED flashes 3 times. after 3 seconds, the LED will turn off and learning is successful.
Working mode description:
1, Tap mode: press the remote control relay to absorb, and release the remote control relay to disconnect.
2、Self-locking mode: press the remote control relay to absorb, and press the remote control again to disconnect the relay.
3、Interlock mode: press the remote control A button, and the relay is absorbed, press the remote control B button is disconnected.
Method to clear the stored information:
Long press the receiver learning button continuously for 8 seconds, and all learned codes will be cleared. After clearing the codes, all remote controls can not work.
Package Includes:
1x remote control
1x Switch controller
