★★★★★★★★★★★
We are selling from Japan.
Our Products are Authentic only.
★★★★★★★★★★★
[Light Claw] A smartphone holder made of reinforced plastic base while retaining the design of the metal claw. The upper arm can be pushed up with the smartphone to attach and remove the smartphone. The guide arms on both sides make it easy to aim at the center and prevent lateral movement. The height of the lower arm and claws cannot be adjusted. The arm can be fixed with the dial on the back to prevent the arm from opening due to impact while driving. The standard [Air Mount] has an air cap like an air suspension that floats the holder, efficiently absorbing high frequencies caused by engine vibrations and reducing the risk of damage to the smartphone camera's image stabilization function. It has a vibration reduction effect that exceeds that of a separate vibration absorber, while improving posture stability against gaps such as steps. The KDR-M25 model is recommended for those who think that "metal claws are expensive and difficult to afford," "the square protrusions on the smartphone case get in the way," or "the Air Mount is good."
[Compatible models] iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14pro / 14pro max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE 3 / SE 2 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 / 8 Plus / 7 / 6 / Samsung Galaxy / Google Pixel / Kyocera Torque / Sony Xperia / Sharp Aquos, others
*Please check the actual size including the conditions of smartphone accessories such as cases. This is a condition for compatibility with the hold, and camera exposure is not included in the conditions. ■ Vertical width 120-168mm, horizontal width 63-87mm (please check that the size of the smartphone model is within the range.) ■ Thickness 17mm or less (please be careful of thick smartphone models and cases.) ■ Excellent compatibility because it can accommodate a maximum thickness of 17mm without being affected by smartphone cases and bunker rings. ■ In case of an emergency, we recommend using a safety strap KDR-SFB-S or a carabiner to connect to the handle after setting the holder to prepare for unforeseen circumstances.
[1-inch ball mount and intermediate mount] The mount is made of aluminum alloy with excellent strength and resistance to deterioration. The holder position can be adjusted with a high degree of freedom at two joints. The aluminum intermediate mount has a theft-proof structure that cannot be loosened unless the included SST is used. Although it is completely fixed, once it is tightened, the angle cannot be changed.
[Product Specifications] ■Holder size: Height 120-168mm, width 63-87mm, thickness 17mm ■Material: Aluminum alloy (holder surface/mount) + reinforced plastic PA66+GF ■Weight: 232g ■Set contents: Main unit (1 inch ball), bar mount (1 inch ball/32mm/width 15mm), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, hexagonal wrench, 60mm intermediate mount security type *SST included ■Instruction manual (online only): As part of our efforts towards decarbonization and reducing our environmental impact, we have refrained from enclosing the instruction manual in paper form. It can be viewed or downloaded from each product page on the Kaedear official website. ■Brand: Kaedear
Manufacturer's warranty: ■ Manufacturer's warranty period: 1 year (expiration date is the same as the purchase date) Kaedia will support you after the sale to ensure your satisfaction. We have staff with national maintenance qualifications who can respond appropriately to any questions you may have about the product, as well as to any consultations regarding installation on your motorcycle. In the unlikely event that the product is found to be defective, we will review the matter based on our manufacturer's warranty regulations and repair or replace the product free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be halved (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will support you with a spirit of hospitality. Please feel free to contact us first.
[Light Claw] A smartphone holder made of reinforced plastic base while retaining the design of the metal claw. The upper arm can be pushed up with the smartphone to attach and remove the smartphone. The guide arms on both sides make it easy to aim at the center and prevent lateral movement. The height of the lower arm and claws cannot be adjusted. The arm can be fixed with the dial on the back to prevent the arm from opening due to impact while driving. The standard [Air Mount] has an air cap like an air suspension that floats the holder, efficiently absorbing high frequencies caused by engine vibrations and reducing the risk of damage to the smartphone camera's image stabilization function. It has a vibration reduction effect that exceeds that of a separate vibration absorber, while improving posture stability against gaps such as steps. The KDR-M25 model is recommended for those who think that "metal claws are expensive and difficult to afford," "the square protrusions on the smartphone case get in the way," or "the Air Mount is good."
