HOW IS IT ASSEMBLED?
Mounting can be done with 3M Double-sided tape, Silicone or Screw.
Installation with Screw:
After placing the diffuser on the rear bumper of your vehicle symmetrically, fix it with a screw.
By taking advantage of the flexibility of the product, stretch the parts that do not come into contact with your bumper and make contact with your bumper, then apply screws to those areas.
Installation with silicone or 3M double sided tape:
Apply silicone or apply 3M tape to the areas of your diffuser that will come into contact with the pad.
Next, place the diffuser symmetrically on the rear bumper ofyour vehicle.
Apply extra glue to the parts of the product that do not comeinto contact with the bumper.
Using the flexibility of the product, stretch the areas that do not come into contact with your tampon and apply pressure until the product adheres.
Continue to apply pressure until the glue dries.
Do not wash your vehicle within 24 hours after this procedure.
Important note:Since the flexibility of the product is used in product assembly, all edges of the product may not contact your vehicle's bumper and there may be small gaps between the product edges between the two screws and the vehicle bumper. This is normal.
You may need to cut the original exhaust of your vehicle and turn it down depending on the situation.
