It is a transmitter type USB controller.
All throttle operations in Mode 1, Mode 2, Mode 3, and Mode 4 can be changed with the changeover switch on the back, and full spring specifications can also be changed with the switch on the back. (Due to the structure of the mode change mechanism, there is some play near the center when full spring is selected.)
In the initial state, the mode selector switch on the back of the controller is set to MODE2/4 NORMAL. In MODE2/4 NORMAL, the left stick is a throttle that moves freely up and down. If you want Mode 1, where the right stick moves freely in the up and down directions, you need to switch the switch on the back to MODE 1/3 NORMAL.
If you want both left and right sticks to return to the center with springs, you need to switch the switch on the back to either MODE 2/4 or MODE 1/3 of CENTER. If you don't know the meaning of the above technical terms, please look it up on Google.
Only Real Flight Evolution, RF9.5S, RF9.5, RF9, RF8.5, RF8 can be used.
The MALTA/REAL FLIGHT brand is sold with dealer markings and stickers.
JAN: 4573176132210 is an FBA registered product under the REAL FLIGHT brand.
Real Flight Transmitter type USB controller single item InterLink DX for RF-Evolution/RF9.5S/RF9.5/RF9/RF8.5/RF8 SPMRFTX1
This product is sold separately from the Real Flight Set.
Features
The new USB controller InterLink DX allows you to change the throttle stick operation to Mode 1, Mode 2, Mode 3, or Mode 4 using the mode switch on the back.
You can also change to full spring specification using the mode selector switch on the back. (Due to the structure of the mode change mechanism, there is some play near the center when full spring is selected.)
In the initial state, the mode selector switch on the back of the controller is set to MODE2/4 NORMAL.
MODE2/4 NORMAL is a throttle where the left stick moves freely up and down.
If you want Mode 1, where the right stick moves freely in the up and down directions, you need to switch the switch on the back to MODE 1/3 NORMAL.
If you want both left and right sticks to return to the center with springs, you need to switch the switch on the back to either MODE 2/4 or MODE 1/3 of CENTER.
If you don't know the meaning of any of the above technical terms, please look it up on Google.
Product contents
●Transmitter type USB controller (InterLink DX)
●Japanese guide
★Caution★
Only Real Flight Evolution, RF9.5S, RF9.5, RF9, RF8.5, and RF8 software can be used.
- A USB controller with USB 1.1 specifications may not be recognized properly due to a problem with the USB driver on the PC side.
The more recent the PC, the more likely this phenomenon is to occur, and PC manufacturers are leaving the PC without backward compatibility with USB 1.1, which should have been included.
The current solution is to use a USB 2.0 specification USB hub to connect between the PC's USB port and the USB controller.
By using a USB hub, the PC will recognize the USB hub with a general-purpose driver, and the USB hub will be able to recognize the controller and recognize it normally.
*BUFFALO USB hub, USB 2.0 specification, bus power, 4 ports is recommended.
