Label:Yes
Overload, Short Circuit Protection: Yes
Output Current: 10A
Protection Degree: IP30
Working Temperature: -40~55
Package Included:1* Auto Solar Charge Controller ,1*Manual
Power Range: 60W(6V), 120W(12V)
Charge Loop Drop: 0.2V
System Voltage: 6V, 12V
Material: Plastic
Color: As the Pictures shown
No-load loss: 5mA
Size: As the Pictures shown
Quantity: 1 Pc
Disharge Loop Drop: 0.1V
Install and Method of Using:
Firstly, determine the controller output mode , the device factory default setting is normally open mode .if you need to set for the pure light control mode or light control plus timing mode, you need to open the enclosure through set dip switch, changing the discharge mode
When the key set "on" is 1, the key set "off" is 0, normally open, pure light control
Connecting the battery first. if correctly connected, battery indicator will light
Connecting the wire of the solar panel second. if the connection is correct, the indicator light of chargewill be on or flash 10 seconds later after laying outside under the sun. otherwise, please check the connection
Making sure the solar energy panel is laid outdoors under the sunshine
Connecting the load at the end. if inversely connected, the led lamp may be damaged
Please pay attention to the anode and the cathode to avoid the inverse connection
Note:
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
