FOR Clio 4 Stop Lamp Frame Sticker 2012 To 2020 RS

+ Easy Application + Long lasting + No disassembly drilling required + Does not leave traces when removed. + 70 MICRON It is manufactured from Oracal 641/651 Foil. + The product is sent as pre-cut according to the one-to-one stop lamp outer form. IMPORTANT NOTES ON THE APPLICATION Before the application, the surface should be cleaned of dust, oil and dirt. The application should be done in the shade, on a non-hot surface. Since the product is cut exactly to the size, no stretching should be done. There are two main application methods. DRY APPLICATION

For dry application, first place the cut foil and apply pressure from one corner of the surface. Then apply the remaining parts to the surface with the help of a squeegee, hand or cloth. Depending on the size of the applied foil, the silicone paper can be removed completely before bonding or slowly removed during the bonding process.

WATER APPLICATION

Spray the glued part with a cleaning material that does not contain heavy chemicals (glass glass) and water, and place it on the surface. Wet application offers the advantage of easily positioning the print run.

Apply pressure to the foil by spreading the foil on the surface with a squeegee.

Make sure that the water between the glued part and the surface is completely removed. In wet applications. If the foil on the surface is pressed again a few hours after the application, the adhesive strength of the film increases.